4.1 Manual Registration Mode – NT series
1. Registering an IP-PT to the PBX (Manual Registration Mode) – cont….
(IP-PT IP Address Setting)
3. Using the ‘Navi-Key’, select
‘Network’ and press ‘Enter’.
Menu
-> Network
PBX
IP Port
QoS
STORE EXIT CONT ENTER
NEXT EXIT ENTER
DHCP Enable Disable
IP Address
0. 0. 0. 0.
Subnet Mask
0. 0. 0. 0.
4. Set DHCP to ‘Disable’
EXIT PREV ENTER
DHCP Enable Disable
Default Gateway
0. 0. 0. 0.
6. When complete, press the ‘Enter’ key.
5. Then set the IP-Address, Subnet Mask
and Default Gateway of the IP-PT, using the
‘Navi-key’, Keypad and ‘Enter’ keys etc
To Next Page
Loading...
