1.3 Option Installation (1)
Option Installation
• Optional cards can be installed when the top cover is removed.
• Option Cards are not “Hot-Swap”
• Power must be removed from the unit before optional cards are installed
1. Ensure the Power
Switch is ‘OFF’
2. Remove 3 screws from
the rear of the top cover.
NB: Where possible, Option cards should be installed before installing and powering-on the unit for the first time. When this is
not possible, the system must first be ‘SHUTDOWN’ using the Web Maintenance Console.
Removing the power without shutting down the unit may damage the systems file-structure and render the system inoperable.
To Next Page
Loading...
