Panasonic NS1000 - Full Automatic Mode - Overview

Switching HUB
UT/NT
Series PT
LAN
LAN
Port
DHCP
Server
1.1 ‘Full Automatic’ Registration Mode
Full Automatic Mode – Overview
When UT/NT PTs are connected to the NS1000 on the same network – Full Automatic Registration of
the Terminals is possible. No manual setting of the PTs or PBX is required.
Requirements;
1. DHCP Server (NS1000 or External DHCP Server)
2. V-IPEXT32 or V-UTEXT32 Card is installed in the NS1000
3. Sufficient IP-PT A/Ks are installed.