Panasonic NS1000 - Extension Number Mode - Overview

Switching HUB
UT/NT
Series PT
LAN
LAN
Port
DHCP
Server
2.1 ‘Extension Number’ Registration Mode
Extension Number Mode – Overview
When NT PTs are connected to the NS1000 on the same network – Registration of the Terminals,
inputting only the desired Extension Number is possible. No manual setting of the PTs or PBX is
required.
Requirements;
1. DHCP Server (NS1000 or External DHCP Server)
2. V-IPEXT32 Card is installed in the NS1000
3. Sufficient IP-PT A/Ks are installed.