Panasonic NS1000 - NS1000 - DCHP Server Setting

Thank you !
The END
2. Select ‘Network Service’ -> 1. DHCP
1. Select ‘Settings’ View
3. Enable the NS1000 DHCP Server
4. Set the DHCP Pool range and lease interval.
1-0. NS1000 – DHCP Server setting
The NS1000 can be configured as a DHCP Server.
Where a 3rd party networked DHCP Server is not available, the NS1000 can be configured to provide
DHCP Services.
NB: Be sure to ‘Apply’ and ‘Save’ the changes before proceeding.