A PBX’s system data can be backed up to a USB memory device inserted into the PBX’s USB port.
At a later time, the USB memory device can be used to restore the backed up system data to a PBX.
System Backup to USB
Select the PBX System data to Backup.
You must Backup the System data if you wish to restore
the system at a later date.
Recommendation: Backup All Files
Tool -> System Data Backup to USB
2.1 System Backup – to USB
NB:
•The UPS connection must be removed before inserting the USB Device – re-connect it afterwards.
•UM data is backed up using a different process – only PBX data is backed-up by this process.
•Use a USB Device with minimum 512MB free space.
To Next Page
Loading...
