Select ‘On’ or ‘Off’(Default)
1. System Control -> Program
Update -> Update Program File
When Plug and Update is enabled, the version number of the system software stored on the Master unit is compared
to the system software currently in the IP-PT, after the IP-PT has been registered to the PBX.
If the software on the Main unit is newer, it is downloaded to the IP-PT.
Plug and Update can be enabled for each site in a One-look network.
The Plug and Update screen lists the PBXs in the One-look network by site number and site name.
1.3 PBX System Firmware Upgrade (3)
The Plug and Update feature allows IP-PTs to be automatically updated to the latest software version
when they are registered to the PBX.
Plug and Update
To Next Page
Loading...
