The ‘Default’ MOH file details (and additional
files when they are loaded) can be seen via:
System Control -> 2. MOH -> 3. Status / Backup
Filename and Filesize can be see here, together with the option to Backup
Remaining Capacity Time
4.1 MOH/BGM File Status
Initially, a preinstalled audio file is set as the audio source for BGM 1.
Through system programming, this file can be removed or replaced like any other BGM audio file.
However, if the PBX is re-initialised, this preinstalled audio file is set to BGM 1 again.
Notes
•
Users logged in to the Master unit can see the status of all One-look network sites. Users logged in to a Slave unit may only view the status of that PBX.
•
Only WAV files can be installed and file names must not exceed 14 ASCII characters in length.
• Files may not be larger than 80 MB.
• User (User) level accounts cannot perform this procedure.
To Next Page
Loading...
