Syslog Server
IP-PT
SNMP
Manager
SMDR
CTI
Standard Syslog Protocol
FF key (System Alarm feature button) *
Standard SNMP
(V.1 and V.2)
RS232C or Telnet
CSTA
PC
E-mail
3.1. System Alarms
NS1000 can indicate that a system alarm occurred in several ways.
Error information (error codes, sub codes, etc.) are notified.
(Refer to Installation Manual for error code detail).
*: When a system error occurs, the button light turns on red. Pressing the button will show the error information on the display.
UT Series / SIP Phone does not support this feature.
To Next Page
Loading...
