Panasonic NS1000 - IP Terminal Registration Modes Overview

1. Full Automatic Mode 2. Extension Input Mode 3. Manual Mode
UT series Yes No Yes
NT3xx / NT265 Yes Yes Yes
NT700 No No Yes
General SIP Phone No No Yes*
(*) Only input the Password
Supported Modes – by terminal type.
Introduction
The NS1000 supports 3 methods of IP terminal registration.
1. Full Automatic Mode
When an IP terminal is connected to the network, the IP terminal will automatically discover the
main unit and an unallocated extension number will automatically assigned to the IP Terminal.
2. Extension Input Mode
When an IP terminal is connected to the network, the IP terminal will automatically discover the
main unit and the user will be asked to input an extension number.
3. Manual Mode
Same operation as TDE/NCP.
NB: DHCP Server is required for Full/Extension Input Modes