[NETWORK] menu
ENGLISH - 129
Settings
3) Press
to select each item, and
press
to change the setting.
[Art-Net]
Sets to [ON] when the Art-Net
function is used. Sets to [OFF]
when the Art-Net function is not
used.
[PORT
ADDRESS]
Enters a port address that the
projector processes Art-Net.
[START
ADDRESS]
Enters a start address that the
projector processes Art-Net.
[STORE] Saves the current Art-Net settings.
4) Press
to select [STORE], and
press the <ENTER> button.
5) When the conrmation screen is
displayed, select [OK] or [CANCEL],
and press the <ENTER> button.
To Next Page
Loading...
