Panasonic PT-DZ21KU

Menu navigation
ENGLISH - 65
Settings
Sub-menu
The sub-menu of the selected main menu item is
displayed, and you can set and adjust items in the
sub-menu.
■
[PICTURE]
Sub-menu item
Factory
default
Page
[PICTURE MODE]
[STANDARD]
*1
67
[CONTRAST] [0] 68
[BRIGHTNESS] [0] 68
[COLOR] [2]
*1
68
[TINT] [–2] 68
[COLOR TEMPERATURE] [DEFAULT] 68
[GAMMA] [DEFAULT] 70
[SYSTEM DAYLIGHT VIEW] [OFF] 70
[SHARPNESS] [8] 70
[NOISE REDUCTION] [2] 71
[DYNAMIC IRIS] [2] 71
[SYSTEM SELECTOR] [YP
B
P
R
]
*1
72
*1: Depends on the signal input.
Note
z
The factory default settings may vary depending on
the picture mode.
■
[POSITION]
Sub-menu item
Factory
default
Page
[SHIFT] — 74
[ASPECT] [DEFAULT]
*1
74
[ZOOM] — 75
[CLOCK PHASE] [0] 76
[GEOMETRY]
*2
[OFF] 76
[KEYSTONE]
*3
— 78
*1: Depends on the signal input.
*2: PT-DZ21KU and PT-DS20KU only
*3: Only for PT-DW17KU
■
[ADVANCED MENU]
Sub-menu item
Factory
default
Page
[DIGITAL CINEMA REALITY] [AUTO]
*1
80
[BLANKING] — 80
[INPUT RESOLUTION] — 81
[CLAMP POSITION] [24]
*1
81
[EDGE BLENDING] [OFF] 81
[FRAME RESPONSE] [NORMAL] 83
[FRAME LOCK]
*2
[OFF] 83
[RASTER POSITION] — 83
*1: Depends on the signal input.
*2: PT-DZ21KU and PT-DS20KU only
■
[DISPLAY LANGUAGE]
Details (

page 84)
■
[3D SETTINGS]
*1
Sub-menu item
Factory
default
Page
[3D SYSTEM SETTING] [SINGLE] 85
[3D SYNC SETTING] — 85
[3D SIMUL INPUT SETTING] — 86
[3D INPUT FORMAT] [AUTO]
*2
87
[LEFT/RIGHT SWAP] [NORMAL] 87
[3D COLOR MATCHING]
[SHARED
2D/3D]
87
[3D PICTURE BALANCE] — 88
[DARK TIME SETTING] [1.5 ms] 88
[3D FRAME DELAY] [0 us] 89
[3D TEST MODE] [NORMAL] 89
[3D TEST PATTERN] — 89
[SAFETY PRECAUTIONS
MESSAGE]
[ON] 90
[3D SAFETY
PRECAUTIONS]
— 90
*1: PT-DZ21KU and PT-DS20KU only
*2: Differs based on the selected input terminal.