Switching on/off the projector
50 - ENGLISH
Basic Operation
Switching on/off the projector
Connecting the power cord
Make sure that the supplied power cord is fully inserted into the projector to prevent removal of the
power cord.
Conrm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.
For detailed power cord handling, refer to “Read this rst!” (
pages 2 to 10).
■
To attach the power cord
1)
Check the shapes of the <AC IN>
terminal and the power cord connector
and insert the plug securely in the
correct direction.
2) Insert the power cord plug into an
electrical outlet.
■
To remove the power cord
1) Conrm that the <MAIN POWER>
switch of the main side is on the
<OFF> side, hold the power plug and
unplug it from the outlet.
2)
Remove the power cord from the <AC
IN> terminal while pressing the lock
button on the power cord connector.
Lock Button
To Next Page
Loading...
