[POSITION] menu
ENGLISH - 77
Settings
z
[LENS THROW RATIO]
Set the throw ratio for the lens used.
z
[VERTICAL KEYSTONE]
z
[HORIZONTAL KEYSTONE]
z
[VERTICAL BALANCE]
Adjust the setting according to the lens shift range
in vertical direction.
z
[HORIZONTAL BALANCE]
Adjust the setting according to the lens shift range
in horizontal direction.
■
To set [CURVED]
3) Select [CURVED] in Step 2), and press
the <ENTER> button.
z
The [GEOMETRY:CURVED] screen is
displayed.
4) Press
to select the item you want
to adjust, and press
to adjust the
correction amount.
z
The projected image can be corrected.
z
[LENS THROW RATIO]
Set the throw ratio for the lens used.
z
[VERTICAL KEYSTONE]
z
[HORIZONTAL KEYSTONE]
z
[VERTICAL ARC]
z
[HORIZONTAL ARC]
z
[VERTICAL BALANCE]
z
[HORIZONTAL BALANCE]
z
[MAINTAIN ASPECT RATIO]
Select [ON] to correct while keeping the aspect ratio.
■
To set [CORNER CORRECTION]
3) Select [CORNER CORRECTION] in
Step 2), and press the <ENTER>
button.
z
The [GEOMETRY:CORNER CORRECTION]
screen is displayed.
To Next Page
Loading...
