[POSITION] menu
ENGLISH - 79
Settings
Note
z
The menu or logo may run off the screen
when various adjustments are performed with
[KEYSTONE].
z
Various adjustments with [KEYSTONE] are
possible to correct up to ±40° for the tilt in vertical
direction. However, the picture quality will degrade
and it will get harder to focus with more correction.
Install the projector so the correction will be as
small as possible. (±22° when using projection lens
ET-D75LE5/ET-D75LE50, or ±28° when using the
ET-D75LE6.)
z
Image size will also change when [KEYSTONE] is
used to perform adjustments.
z
When the keystone is corrected using [KEYSTONE],
the edge blending cannot be adjusted together.
z
Trapezoidal distortion may occur depending on the
lens shift position.
z
Aspect ratio of the image size may shift depending
on the correction or lens zoom value.
z
For the portrait setting, keystone is corrected for
horizontal tilt.
To Next Page
Loading...
