Chapter 4 Settings — [P IN P] menu
126 - ENGLISH
14) Press qw to switch the item.
[MAIN WINDOW] Set frame lock to the input signal set in the main window.
[SUB WINDOW] Set frame lock to the input signal set in the sub window.
15) Press as to select [TYPE].
16) Press qw to switch the item.
[MAIN WINDOW] The main window has display priority.
[SUB WINDOW] The sub window has display priority.
Note
f The P IN P function may not be available for some signals being input or terminals being selected. Refer to “Two-window display
combination list” (x page 174) for details.
f The main window setting values are applied to image adjustment values such as [PICTURE MODE], [GAMMA], and [COLOR
TEMPERATURE].
f While in the normal screen (where no menu is displayed), press qw to switch the sizes and positions of the main window and sub window
while P IN P is operating.
f When [FRAME RESPONSE] is set to other than [NORMAL], [P IN P] cannot be set.
f The combination of DIGITAL LINK and other input cannot be displayed in P IN P.
f When [BACKUP INPUT MODE] is set to [ON], [P IN P] cannot be set.
f When [IMAGE ROTATION] is set to other than [OFF], [P IN P] cannot be set.
To Next Page
Loading...
