Panasonic PT-RZ670

Chapter 2 Getting Started — Setting up
ENGLISH - 41
Formula to calculate projection distance per projection lens
To use a projected image size not listed in this manual, check the projected image size SD (m) and use the respective formula to calculate
projection distance.
The unit of all the formulae is m. (Values obtained by the following calculation formulae contain a slight error.)
When calculating a projection distance using image size designation (value in inches), multiply the value in inches by 0.0254 and substitute it
into SD in the formula for calculating the projection distance.
For PT-RZ670
r Standard zoom lens
Projection lens Model No. Throw ratio Aspect ratio
Projection distance (L) formula
Min. (LW) Max. (LT)
―
1.7 - 2.4:1 16:10 = 1.4906 x SD
- 0.0746 = 2.0814 x SD - 0.0725
1.7 - 2.4:1 16:9 = 1.5320 x SD
- 0.0746 = 2.1393 x SD - 0.0725
2.1 - 2.9:1 4:3 = 1.6874 x SD
- 0.0746 = 2.3563 x SD - 0.0725
r Zoom lens
Projection lens Model No. Throw ratio Aspect ratio
Projection distance (L) formula
Min. (LW) Max. (LT)
ET-DLE085
0.8 - 1.0:1 16:10 = 0.6865 x SD
- 0.0471 = 0.8498 x SD - 0.0442
0.8 - 1.0:1 16:9 = 0.7056 x SD
- 0.0471 = 0.8735 x SD - 0.0442
0.9 - 1.2:1 4:3 = 0.7772 x SD
- 0.0471 = 0.9621 x SD - 0.0442
ET-DLE150
1.3 - 1.9:1 16:10 = 1.1259 x SD
- 0.0540 = 1.6243 x SD - 0.0498
1.3 - 1.9:1 16:9 = 1.1572 x SD
- 0.0540 = 1.6695 x SD - 0.0498
1.6 - 2.3:1 4:3 = 1.2747 x SD
- 0.0540 = 1.8388 x SD - 0.0498
ET-DLE250
2.3 - 3.6:1 16:10 = 1.9665 x SD
- 0.0800 = 3.1059 x SD - 0.0792
2.3 - 3.6:1 16:9 = 2.0212 x SD
- 0.0800 = 3.1923 x SD - 0.0792
2.7 - 4.3:1 4:3 = 2.2263 x SD
- 0.0800 = 3.5161 x SD - 0.0792
ET-DLE350
3.6 - 5.4:1 16:10 = 3.1000 x SD
- 0.1351 = 4.6843 x SD - 0.1346
3.6 - 5.4:1 16:9 = 3.1862 x SD
- 0.1351 = 4.8146 x SD - 0.1346
4.3 - 6.5:1 4:3 = 3.5094 x SD
- 0.1351 = 5.3030 x SD - 0.1346
ET-DLE450
5.4 - 8.6:1 16:10 = 4.6931 x SD
- 0.3017 = 7.4193 x SD - 0.2991
5.4 - 8.6:1 16:9 = 4.8236 x SD
- 0.3017 = 7.6256 x SD - 0.2991
6.5 - 10.3:1 4:3 = 5.3129 x SD
- 0.3017 = 8.3992 x SD - 0.2991
r For xed-focus lens (Model No.: ET-DLE055)
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L) formula
ET-DLE055
0.8:1 16:10 = 0.6893 x SD
- 0.0476
0.8:1 16:9 = 0.7084 x SD
- 0.0476
0.9:1 4:3 = 0.7803 x SD
- 0.0476
r For xed-focus lens (Model No.: ET-DLE030)
Projection lens Model No. Throw ratio Aspect ratio
Projection distance (L1)
formula
Formula for distance between
projector and screen (A1)
ET-DLE030
0.38:1 16:10 = 0.3205 x SD + 0.0047 = 0.1977 x SD
- 0.0721
0.38:1 16:9 = 0.3294 x SD + 0.0047 = 0.2304 x SD
- 0.0721
0.46:1 4:3 = 0.3628 x SD + 0.0047 = 0.2238 x SD
- 0.0721