Panasonic PT-RZ670

Chapter 1 Preparation — Precautions for use
22 - ENGLISH
rComputer and external device connections
f When connecting a computer or an external device, read this manual carefully regarding the use of power cords and
shielded cables as well.
f To assure continued performance and FCC compliance, use only high quality DVI-D interface cable with two ferrite cores for
connecting with the <DVI-D IN> terminal.
Accessories
Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the number of
accessories.
Wireless/wired remote control unit <1>
(N2QAYA000060)
Power cord
(TXFSX03VBDZ)
(TXFSX02VBDZ)
(TXFSX03VARZ)
(TXFSX02UTRZ)
Lens Mount Cover <1>
(Black model: TKPB63901)
(White model: TKPB63902)
(The same color as the outer case will be supplied.)
Lens cover <1>
(TKKL5244-1)
(Only models with lens)
CD-ROM <1>
(TXFQB02VARZ)
AAA/R03 battery <2>
(For remote control unit)
Attention
f After unpacking the projector, discard the power cord cap and packaging material properly.
f Do not use the supplied power cord for devices other than this projector.
f For missing accessories, consult your dealer.
f Store small parts in an appropriate manner, and keep them away from small children.
Note
f The type and number of the supplied power cords vary depending on the country or region where you purchased the
product.
f The model numbers of accessories are subject to change without prior notice.