Panasonic PT-RZ670

Chapter 4 Settings — Menu navigation
ENGLISH - 69
Main menu item Page
[PROJECTOR SETUP] 107
[P IN P] 125
[TEST PATTERN] 127
[SIGNAL LIST] 128
[SECURITY] 131
[NETWORK] 135
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
[PICTURE]
Sub-menu item Factory default Page
[PICTURE MODE] [STANDARD]
*1
72
[CONTRAST] [0] 72
[BRIGHTNESS] [0] 72
[COLOR] [0] 73
[TINT] [0] 73
[COLOR TEMPERATURE] [DEFAULT] 73
[WHITE GAIN] [+10] 75
[GAMMA] [DEFAULT] 75
[SYSTEM DAYLIGHT VIEW] [OFF] 76
[SHARPNESS] [+6] 76
[NOISE REDUCTION] [OFF] 76
[DYNAMIC CONTRAST] [2] 77
[SYSTEM SELECTOR] [YP
B
P
R
]
*1
77
*1 Depends on the signal input.
Note
f The factory default settings may vary depending on the picture mode.
[POSITION]
Sub-menu item Factory default Page
[SHIFT] ― 79
[ASPECT] [DEFAULT]
*1
79
[ZOOM] ― 80
[CLOCK PHASE] [0]
*1
81
[GEOMETRY]
*2
[OFF] 81
[KEYSTONE]
*3
― 84
*1 Depends on the signal input.
*2 Only for PT-RZ670
*3 Only for PT-RW630
[ADVANCED MENU]
Sub-menu item Factory default Page
[DIGITAL CINEMA REALITY] [AUTO]
*1
85
[BLANKING] ― 85
[INPUT RESOLUTION] ― 86