Chapter 4 Settings — [NETWORK] menu
152 - ENGLISH
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report (ERRO R) ===
Projector T ype : RZ670
Serial No : SH1234567
----- check system -----
MAIN CPU BUS [ OK ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
EXHAUST AIR TEMPERATURE [ OK ]
LD1 TEMPERATURE [ OK ]
LD2 TEMPERATURE [ OK ]
LD1 STATUS [ OK ]
LD2 STATUS [ OK ]
INTAKE AIR TEMP.SENSOR [ OK ]
OPTICS MODULE TEMP.SENSOR [ FAILED ]
EXHAUST AIR TEMP.SENSOR [ OK ]
LD1 TEMP.SENSOR [ OK ]
LD2 TEMP.SENSOR [ OK ]
BATTERY [ OK ]
COLOR WHEEL [ OK ]
PROJECT I ON LENS [ OK ]
LENS MOUNTER [ OK ]
BRIGHTNESS SENSOR [ OK ]
PHOSPHOR WHEEL1 [ OK ]
PHOSPHOR WHEEL2 [ OK ]
AC POWER [ OK ]
(Error code 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00)
Intake air t emperature : 27 degC / 80 degF
O ptics module t emperature : 33 degC / 91 degF
Exhaust air t emperat ure : 30 degC / 86 degF
LD1 temperature : 30 degC / 86 degF
LD2 temperature : 31 degC / 87 degF
PROJECT O R RUNT IME 1 H
POWER O N 1 t imes
LD1-1 O N 1 t imes
LD1-1 RUNT IME 10 H
LD1-2 O N 1 t imes
LD1-2 RUNT IME 10 H
LD1-3 O N 1 t imes
LD1-3 RUNT IME 10 H
LD1-4 O N 1 t imes
LD1-4 RUNT IME 10 H
LD2-1 O N 1 t imes
LD2-1 RUNT IME 10 H
LD2-2 O N 1 t imes
LD2-2 RUNT IME 10 H
LD2-3 O N 1 t imes
LD2-3 RUNT IME 10 H
LD2-4 O N 1 t imes
LD2-4 RUNT IME 10 H
-------- Current status ---------
MAIN VERSION 1.00
SUB VERSION 1.00
LD STAT US
LD1-1=ON LD1-2=ON LD1-3=ON LD1-4=O N
LD2-1=ON LD2-2=ON LD2-3=ON LD2-4=O N
INPUT RG B1
SIGNAL NAME ---
SIGNAL F REQ UENCY ---kHz / ---Hz
REMOTE2 STATUS DISABLE
----- Wired Network configuration -----
DHCP Client O FF
IP address 192. 168.0.8
MAC address 70:58:12: 00:00:0
Mon Jan 01 12: 34:56 20XX
----- Memo -----
To Next Page
Loading...
