Panasonic PT-RZ670 - Page 154

Chapter 4 Settings — [NETWORK] menu
154 - ENGLISH
[User] account
1
2
3
1 [Account]
Displays the account to change.
2 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
3 [OK]
Determines the change of password.
[Change password] (For user rights)
Only the change of password is enabled under the user rights.
1
2
4
3
1 [Old Password]
Enter the current password.
2 [New Password]
Enter the desired new password. (Up to 16 characters in single
byte)
3 [Retype]
Enter the desired new password again.
4 [OK]
Determines the change of password.
Note
f To change the account of the administrator, you must enter the [User name] and [Password] in [Current].
[Crestron Connected(TM)] page
The projector can be monitored/controlled with Crestron Connected
TM
.
To start the operation page of Crestron Connected
TM
from the web control screen, you need to access with the administrator rights. (For user
rights, the [Crestron Connected(TM)] button is not displayed on the web control screen.)
The operation page of Crestron Connected
TM
is displayed by clicking [Crestron Connected(TM)].
It is not displayed if Adobe Flash Player is not installed on your computer, or the browser you use does not support Flash. In that case, click
[Back] on the operation page to go back to the previous page.