6) Press as to select [PASSWORD] under [CURRENT], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
7) Press asqw to select a character, and press the <ENTER> button.
f Enter the current password.
8) After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
9) Press as to select [USER NAME] under [NEW], and press the <ENTER> button.
f The [USER NAME] screen is displayed.
10) Press asqw to select a character, and press the <ENTER> button.
f Enter a new user name.
f Enter the current user name if you do not want to change it.
f Up to 16 characters can be entered.
11) After entering the user name, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
12) Press as to select [PASSWORD] under [NEW], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
13) Press asqw to select a character, and press the <ENTER> button.
f Enter a new password.
f Up to 16 characters can be entered.
f Enter the current password if you do not want to change it.
14) After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
15) Press as to select [PASSWORD CONFIRM] under [NEW], and press the <ENTER> button.
f The [PASSWORD CONFIRM] screen is displayed.
16) Enter the password entered in Step 13).
17) After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
18) Press as to select [STORE], and press the <ENTER> button.
f The conrmation screen is displayed.
19) Press qw to select [OK], and press the <ENTER> button.
Note
f For restrictions on character strings that can be set for password, refer to [PASSWORD POLICY] (x page 98).
f The user name and password of the administrator account can also be changed on the [Set up password] page (x page 128) of the web
control screen.
f The user name and password of a standard user account without administrator rights can be set on the [Set up password] page
(x page 128) of the web control screen.
[NETWORK SECURITY]
Make settings to protect the projector from external attacks via LAN and unauthorized use.
Setting the password of the administrator account (x page 98) is required for setting the [NETWORK
SECURITY] menu.
[COMMAND PROTECT]
Make settings for the connection authentication when using the command control function.
1) Press as to select [NETWORK SECURITY].
2) Press the <ENTER> button.
f The [NETWORK SECURITY] screen is displayed.
100 - ENGLISH
Chapter 4 Settings - [NETWORK] menu
To Next Page
Loading...
