Panasonic PT-TMZ400

2) Press as to switch the item.
[DIGITAL ZOOM EXTENDER] Sets [DIGITAL ZOOM EXTENDER] to extend the projection distance.
[DIGITAL IMAGE SHIFT]
Adjusts the image position as necessary when [DIGITAL ZOOM EXTENDER] is set to anything other
than [OFF] and [100%].
[KEYSTONE] Adjusts when the trapezoid of the projected image is distorted.
[CORNER CORRECTION] Adjusts when the four corners of the projected image are distorted.
[CURVED CORRECTION] Adjusts any curved distortion in the projected image.
[6POINT CORRECTION]
*1
Corrects the distortion that occurs when projecting on a horizontal corner surface, such as a wall
corner or a square pillar.
*1 Only for PT-TMZ400
f Press qw to switch the item if [DIGITAL ZOOM EXTENDER] is selected.
f Proceed to Step 3) if anything other than [DIGITAL ZOOM EXTENDER] is selected.
3) Press <ENTER> button.
f The [DIGITAL IMAGE SHIFT] screen, [KEYSTONE] screen, [CORNER CORRECTION] screen, [CURVED
CORRECTION] screen or the [6POINT CORRECTION] screen is displayed.
Note
f For more details, refer to the [POSITION] menu → [SCREEN ADJUSTMENT]. (x page 69)
Using the digital zoom function
(Only for computer signals input)
You can enlarge images. You can also change the location of the images to be enlarged.
buttons
1) Press the <D.ZOOM -> button/<D.ZOOM +> button.
f The moving screen is displayed when executing the remote control operation, and the [DIGITAL ZOOM]
individual adjustment screen is not displayed.
f The [DIGITAL ZOOM] individual adjustment screen is displayed when executing the menu operation. For
details, refer to [DISPLAY OPTION] menu → [OTHER FUNCTIONS] → [DIGITAL ZOOM]. (x page 82)
2) Press the following buttons to move the location of the image or adjust the magnification.
f The digital zoom function is canceled if the <D.ZOOM -> button/<D.ZOOM +> button is pressed for three
seconds or more or if the <MENU> button is pressed.
Operation menu/Buttons Operation Adjustment
Moving screen
Remote control operation button
Press the a button.
Moves the image to the bottom.
Press the s button.
Moves the image to the top.
Press the q button.
Moves the image to the right.
Press the w button.
Moves the image to the left.
Press the <D.ZOOM +> button. Increases magnication.
Press the <D.ZOOM -> button. Decreases magnication.
54 - ENGLISH
Chapter 3 Basic Operations - Operating with the remote control