Panasonic PT-TMZ400

Precautions for attaching the Ceiling Mount Bracket
f When installing the projector to a ceiling, be sure to use the specied optional Ceiling Mount Bracket.
Model No.: ET-PKL100H (for high ceilings), ET-PKL100S (for low ceilings), ET-PKL430B (Projector mount
bracket)
f When installing the projector, attach the drop-prevention kit included with the Ceiling Mount Bracket.
f Ask a qualied technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic Connect Co., Ltd. takes no responsibility for any damage to the projector resulting from use of a
ceiling mount bracket not manufactured by Panasonic Connect Co., Ltd. or the inappropriate choice of location
for installation, even if the warranty period of the projector has not expired.
f Unused products must be removed promptly by a qualied technician.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specied tightening torques. Do not use
electric screwdrivers or impact screwdrivers.
(Screw tightening torque: 1.25 ± 0.2 N·m)
f Read the Installation Instructions for the Ceiling Mount Bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
r Screw hole specications for ceiling mount (Bottom view)
Unit : mm (inch)
M4 × 0.7
8 mm (5/16")
Screw holes for ceiling mount
Screw hole for wire rope
r Screw hole dimensions for ceiling mount (Bottom view)
Unit : mm (inch)
13 (1/2")
192 (7-9/16")
280 (11-1/32")
312 (12-9/32")
157 (6-3/16") 137 (5-13/32")
69 (2-23/32")
ENGLISH - 159
Chapter 7 Appendix - Precautions for attaching the Ceiling Mount Bracket