Setting [DIGITAL ZOOM EXTENDER]
Sets [DIGITAL ZOOM EXTENDER] to extend the projection distance.
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select [DIGITAL ZOOM EXTENDER].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] Disables the [DIGITAL ZOOM EXTENDER] function.
[100%] ~ [80%]
Select an item if you need to extend the projection distance. The value will be switched by 1% each
time you press the button.
For details, refer to “Projected image and throw distance” (x page 33).
f Proceed to Step 5) if anything other than [OFF] and [100%] is selected.
5) Press as to select [DIGITAL IMAGE SHIFT].
6) Press the <ENTER> button.
f The [DIGITAL IMAGE SHIFT] screen is displayed.
7) Press asqw to adjust the position.
Items Operation Adjustment
[H]
Press the w button.
The image position moves to the right.
Press the q button.
The image position moves to the left.
[V]
Press the a button.
The image position moves up.
Press the s button.
The image position moves down.
Note
f The [DIGITAL ZOOM EXTENDER] function is realized via corner correction and the resolution may decrease when using this function. It is
not recommended to use this function when it is not necessary to extend the projection distance.
Setting
[KEYSTONE]
1) Press as to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f The [SCREEN ADJUSTMENT] screen is displayed.
3) Press as to select [KEYSTONE].
4) Press the <ENTER> button.
f The [KEYSTONE] individual adjustment screen is displayed.
5) Press asqw to adjust the item.
Items Operation Adjustment
[H]
Press the q button.
Left side will be
smaller.
Press the w button.
Right side will be
smaller.
70 - ENGLISH
Chapter 4 Settings - [POSITION] menu
To Next Page
Loading...
