Note
f Press the <FREEZE> button again in freeze status, the paused image is played and the sound is output.
f [FREEZE] is displayed at the lower left of the projection screen in freeze status.
Using the shutter function
Enable (shutter: closed) or disable (shutter: open) the shutter function.
1) Press as to select [OTHER FUNCTIONS].
2) Press the <ENTER> button.
f The [OTHER FUNCTIONS] screen is displayed.
3) Press as to select [SHUTTER].
4) Press the <ENTER> button.
f The image and the sound are turned off.
Note
f Even when the shutter function is in use (shutter: closed), the power <v/b> button, input select buttons (<HDMI 1>, <HDMI 2>,
<COMPUTER 1/2>, <NETWORK / USB>), and <INPUT SELECT> button can be operated.
Using the digital zoom function
(Only for the computer signals.)
This function can enlarge the projected image.
1) Press as to select [OTHER FUNCTIONS].
2) Press the <ENTER> button.
f The [OTHER FUNCTIONS] screen is displayed.
3) Press as to select [DIGITAL ZOOM].
4) Press the <ENTER> button.
f The image with the center part magnied 1.5 times is displayed, and the [DIGITAL ZOOM] individual
adjustment screen is displayed.
5) Press qw to adjust the magnification.
f The magnication can be adjusted from 1.0 to 3.0 times with increments of 0.1.
6) Press the <ENTER> button.
f The operation guide is displayed at the lower left of the screen.
7) Move the enlarged part.
f The image cannot be moved if the magnication is 1.0.
Note
f The digital zoom function is disabled when the freeze function is in use.
f Depending on the input signal, the digital zoom may not work.
f The digital zoom function is canceled if the input signal changes during a digital zoom.
82 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
To Next Page
Loading...
