Adjusting the Tone Quality
SUPER BASS
_ON
BALANCE
:0
r--1
I
To change the tone quality
Adjust the graphic equalizer controls as desired.
• Application examples
-To reproduce disco music-
more powerfully
-- Compensetlon for --
frequency response of
the speaker systems
- For clearer vocals
To reproduce classical --
music
• The characteristics of each frequency band
(100 Hz): deep bass range
When this level is increased, the sounds from the Pass guitar and
drum have a feeling of greater and more impressive mass and
Volume.
When the level is reduced, indistinct sounds are changed to clear
sounds.
(330 Hz): Pass range
When this level is increased, the fullness and expansion of stringed
instruments is produced; when the level is reduced, indistinct sounds
can be clarified.
(1 kHz): mid range
When this level is increased, a greater tension is added to sounds,
applause and cheers become even more lifelike, and an ambient
presence is produced.
(3.3 kHz): mid-high range
When this level is increased, sounds become more lustrous and
bd!liant; when the level is reduced, sounds that are too metallic can be
softened.
(10 kHz): treble range
Whenthislevelis increased,anextraglittercanbe addedtocymbals
andthetdangts;when thelevelis reduced,tape "hissing" noisecan
be reduced
- 28 -
To Next Page
Loading...
