Panasonic SA-PM31PC - Cr16 Mechanism Assembly Procedure

9.25. CR16 MECHANISM ASSEMBLY
PROCEDURE
The following specified greases and/or oil must be applied
when some specific parts are changed.
1. Floil grease (VFK1298) : The floil grease must be
applied to tray, tray (L) and tray (R).
2. Hanarl oil (VFK1700) : The hanarl oil must be applied to
any parts with grease other than the said parts.
· Follow the (Step 1) - (Step 6) of Item 9.2.
· Follow the (Step 1) - (Step 3) of item 9.3.
· Follow the (Step 1) - (Step 4) of item 9.5.
· Follow the (Step 1) - (Step 5) of Item 9.13.
· Follow the (Step 1) - (Step 10) of item 9.24.2.
· Follow the (Step 1) - (Step 4) of item 9.24.3.
· Follow the (Step 1) - (Step 22) of item 9.24.4.
34
SA-PM31P / SA-PM31PC