Panasonic SC-HM910 - CD Mechanism Test (F15, F26, F16, F17, F27, F28, F29, H15); To Clear All Error Code; How to Get out from Self-Diagnostic Function; Power Amplifier Failure (F61)

SC-HM910/SC-HM810
34
10.4 CD Mechanism Test (F15, F26, F16, F17, F27, F28, F29, H15)
1. Press “CD”.
2. Press “OPEN/CLOSE (1)” and place a CD.
3. Press “OPEN/CLOSE (1)” to close the tray.
4. Press “OPEN/CLOSE (5)” and wait until the tray is open.
5. Press “OPEN/CLOSE (1)” and remove the CD.
6. Press “OPEN/CLOSE (1)” to close the tray.
7. Press “TUNE MODE” to indicate Error Code.
• If several problem exist, error code will change each time when “TUNE MODE” is pressed. (e.g. F15 -
F26 - F16... etc).
10.5 To clear all Error code
1. Press “STOP /TUNE MODE” button for 5 seconds.
2. FL indicator shows “CLEAR” for 1 second and change to “T”.
10.6 How to get out from Self-Diagnostic function
1. Press “POWER” button OFF.
10.7 Power Amplifier Failure (F61)
1. When power amplifier fail, F61 will indicate automatically.