SC-HM910/SC-HM810
35
11 CD Test Mode Function
This CD test mode is provided to check CD unit without connecting to changer loading mechanism. This mode shall
operate CD PLAY with CD unit being connected only and CD Automatic Alignment result is shown on FL display.
11.1 How to set CD test mode
11.2 CD Automatically Adjustment result indication
Under CD test mode, pressing the numeric key ‘0’ on the remote controller will display the auto adjustment result. FLOCK,
TLOCK and CLVS status shall be shown as below:
During the above display, executing CD PLAY will display auto adjustment result for CD PLAY mode.
To Next Page
Loading...
