11-9
3) You can press the OK button and enter each fax number to which you want to send fax.
4) When the input is complete, press the Start button to start scanning documents.
5) When the scan is complete, press the OK button to begin the group sending fax job.
Delay Sending
You can enable Delay sending of fax through the Control Panel. When this process is
complete, the printer will scan the document to the memory, and get back to Ready state.
The specic operations are as follows:
1) On the Control Panel, click on the Fax button to enter the fax mode.
To Next Page
Loading...
