To Next Page

To Previous Page

5-2

5. Wireless Network settings (for models with WiFi

printing)

Based on models, printers with WiFi printing support two types of wireless connection,

Infrastructure Connection Mode and WiFi hotspots. Generally, only one type of connection

can be used between the computer and the printer each time.

Infrastructure Connection Mode

The printer communicates with the wireless device via the

access point.

WiFi Hotspot

The wireless computer is directly connected with the wireless

device.

5.1. Conguration via Button

If the printer connects with the wireless router that supports WPS, wireless network can be

easily congured via the WiFi button on the control panel.

Conguration: Press and hold “WiFi” button on the printer’s Control Panel to launch WPS.

Press the WPS button on the wireless router after 2 minutes of the launching, then the printer

will be connected to the wireless network.

Note: • Wireless Router needs to support WPS mode

• WPS must be congured with the network cable unplugged from the printer

5.2. Conguration via USB Connection

USB Connection Conguration means using USB cable to connect the printer with the

computer, then launch the wireless network conguration tool on your computer and conduct

wireless network conguration on the printer.

5.2.1. WiFi Conguration Tool

WiFi Conguration tool is a software designed for the user to congure the wireless network

connection. Open the WiFi Conguration tool from the driver installation package. The

specic steps are as follows:

1) Detect Wireless Network Card

WiFi conguration tool can search the wireless network automatically by a wireless card in

the computer. If the computer does not have a wireless card, the option of "Manually Enter

the SSID" will be automatically checked on the "Wireless Network List" page.

Pantum M6200 User Manual

Questions and Answers: