Pantum M6200 - Single; Merge Scan; Single Page Scan

10-3
10.1.3. Single Page Scan
The default scan mode of control panel is Single Page Scan mode.
For the specic steps of scan operation, please refer to Chapter 10.1.
10.1.4. Merge Scan
When you want to merge multi-page scanned documents into one PDF, please use Merge
Scan function.
Note: • The Merge Scan allow the document to be scanned into the PDF format by
default.
• This printer can perform Merge Scan operation only on the control panel.
The specic operations are as follows:
1. Press "Scan" button to enter scan status. The default scan mode of control panel is Single
Page.
M6200/M6500/M6550 Series M6600 Series
2. Press "
▲
" or "
▼
" button to select and enter "Merge Scan" mode.
M6200/M6500/M6550 Series M6600 Series
Note: • For a single page scanned to PC/E-mail/FTP, you can save it as PDF, TIFF or
JPEG;
• If you choose to scan to PC with N-UP Scan under the ADF scanning mode, the
scanned documents will be PDFs by default; For those scanned to E-mail/FTP with
N-UP Scan, you can save them as PDF, TIFF or JPEG;