Pantum M6200 - General Settings; System Settings; Toner Save Setting

7-2
7. General Settings
This chapter mainly introduces some general settings of the menu on the control panel.
7.1. System Settings
7.1.1. Toner Save Setting
Users can select Toner Save Setting to lower the cost of printing. When the Toner Save mode
is "On", the output color of the copy will be lighter. Default Setting is "Off".
1) Press "Menu" button to enter the menu interface.
M6200/M6500/N6550 Series M6600 Series
2) Press direction pad "
▲
" or "
▼
" to select "3. System Settings" and press "OK" button.
M6200/M6500/N6550 Series M6600 Series
3) Press direction pad "
▲
" or "
▼
" to select "1. Toner Save Setting" option and press "OK"
button.
M6200/M6500/N6550 Series M6600 Series