7-5
7.1.4. Sleep Time Setting
Set the Sleep Mode to lower the power consumption. Sleep Time Setting allows you to select
the idle time before the device enter into Sleep Mode. The default idle time is 1 minute.
1) Press "Menu" button to enter the menu interface.
2) Press direction pad "▲" or "▼" to select System Settings and press OK button.
3) Press direction pad "
▲
" or "
▼
" to select "4. Sleep Time Setting" and press OK button.
4) The direction pad "
▲
" or "
▼
" can be used to select "1 Minute", "5 Minutes", "15 Minutes",
"30 Minutes", and "60 Minutes".
M6200/M6500/N6550 Series M6600 Series
Note: • When the printer is in dormant status, you can wake it up just by pressing Power
Saving button, sending print/scan/fax task, or opening or closing the output bin.
7.1.5. Network Settings
You can view or set the network status through Network Settings.
1) Press "Menu" button to enter the menu interface.
2) Press direction pad "▲" or "▼" to select System Settings and press OK button.
3) Press direction pad "▲" or "▼" to select Network Settings and press OK button.
M6200/M6500/N6550 Series M6600 Series
To Next Page
Loading...
Need help?
General