6-7
9. Set the scan parameters below the interface. Click “Start” on the top right corner to start
printing.
10. After the scan is nished, click on “Done” on the top right corner, and the following
interface pops up to prompt you to input the title of the folder.
6.3.2. For Apple IOS Devices (iPad, iPhone, etc)
1. Turn on the printer.
2. Launch the WiFi in the mobile device, connect it with the WiFi hotspot of Pantum printer (for
example, the WiFi hotspot displays Pantum-AP-XXXXXX).
3. Launch the Pantum Scan APP icon (as is shown below), enter into the following interface:
To Next Page
Loading...
Need help?
General