11-17 17
Use the Contacts in PC-Fax
1) Open the PC-Fax software and the "Pantum will send fax" interface appears.
2) Click Show Contacts and the Contacts interface pops up on the right. Connect the printer
to the computer and click Read to read the local Contacts list on the printer.
3) Use the Search function to select fax numbers you want to use, and click "<" to add the fax
numbers from Contacts to the Recipient List.
4) Click Send to start sending the fax.
Use Cover in PC-Fax
If you want to use a fax cover page, you can use the following steps to set the Cover Settings.
1) Open the PC-Fax software and the ”Pantum will send fax" interface appears.
2) Check Use Cover at the bottom left corner and click Cover Settings to enter the Cover
Settings interface.
To Next Page
Loading...
Need help?
General