12-4
Some parts of the printer are still hot within a short time after use. When opening
the front cover or rear cover to clean the parts inside the printer, please do not
touch the parts in the shaded area as shown in the following picture, so as to
avoid burns.
Warning
Note: • When removing the laser toner cartridge, put the cartridge in a protective bag or
wrap it with thick paper to avoid direct light damaging the photosensitive drum.
7. Gently wipe the dustproof mirror of laser scanning surface with a cotton swab or a dry and
lint-free soft cloth with a little alcohol.
M6200/M6500 Series M6550/M6600 Series
8. Clean the inside of the printer by using a dry and lint-free cloth to gently wipe the shaded
area as shown in the picture below.
M6200/M6500 Series M6550/M6600 Series
To Next Page
Loading...
