Parker AC10 series User Manual

14-7
AC10 Inverter
Tightening torque and wire range for field grounding wiring terminals are marked adjacent to
the terminal or on the wiring diagram.
Frame Size Terminal Type
Required
Torque (in-lbs)
Wire Range
(AWG)
16G-31-0025-XX
16G-31-0045-XX
16G-31-0070-XX
16G-31-0100-XX
16G-11-0025-XX
16G-11-0045-XX
16G-11-0070-XX
16G-11-0100-XX
16G-41-0020-XX
16G-41-0040-XX
16G-41-0065-XX
16G-41-0080-XX
16G-41-0090-XX
16G-42-0120-XX
16G-42-0170-XX
16G-43-0230-XX
16G-43-0320-XX
Grounding
Terminal Block
6.2 8
TC-Hydraulik - Rsdorfer Str. 8 - 25746 Heide - Lars Lornsen - T: +49 481 909 - 34 - l.lornsen@tc-hydraulik.de - www.tc-hydraulik.de

Parker AC10 series Specifications

General

Overload Capacity	150% for 60 seconds
Analog Inputs	2
Analog Outputs	1
Communication Options	Modbus RTU
Protection Rating	IP20
Input Voltage	200-240VAC, 380-480VAC, 500-575VAC, 600VAC, 690VAC
Digital Outputs	2
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Operating Temperature	-10°C to +50°C
Humidity	5% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Braking	Built-in dynamic braking