Parker AC10 series User Manual

14-8 Compliance
AC10 Inverter
14.3 Declaration
AC10 Series Frames 1 – 3 (0.4kW-15kW) Protection Level IP66
Manufacturers EC Declarations of Conformity
Date CE marked first applied: 01/12/14
EMC Directive Low Voltage Directive
In accordance with the EC Directive
2004/108/EC
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment) is in accordance with the relevant
clauses from the following standards:-
EN 61800-3 (2004)(+A1:2012)
Note: Filtered versions
In accordance with the EC Directive
2006/95/EC
We Parker Hannifin Manufacturing
Limited, address as below, declare
under our sole responsibility that the
above Electronic Products when
installed and operated with reference
to the instructions in the Product
Manual (provided with each piece of
equipment), is in accordance with the
following standard :-
EN 61800-5-1 (2007)
Manufacturers Declarations of Conformity
EMC Declaration Low Voltage and Machinery Directives
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment) is in accordance with the relevant
clauses from the following standards:-
BSEN61800-3 (2004)(+A1:2012)
Notes:
Non-filtered versions
This is provided to aid justification for EMC
Compliance when the unit is used as a
component.
The above Electronic Products are
components to be incorporated into
machinery and may not be operated
alone.
The complete machinery or
installation using this equipment may
only be put into service when all
safety considerations of the Directive
2006/42/EC are fully implemented.
Particular reference should be made
to EN60204-1
(Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual
must be implemented.
Mr. Jonathan McCormick
(UK Quality Assurance & Compliance Manager)
Parker Hannifin Manufacturing Limited, Automation Group, SSD Drives Europe,
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44 (0) 1903 737000, FAX: +44 (0)1903 737100
Registered Number 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
TC-Hydraulik - Rsdorfer Str. 8 - 25746 Heide - Lars Lornsen - T: +49 481 909 - 34 - l.lornsen@tc-hydraulik.de - www.tc-hydraulik.de

Parker AC10 series Specifications

General

Overload Capacity	150% for 60 seconds
Analog Inputs	2
Analog Outputs	1
Communication Options	Modbus RTU
Protection Rating	IP20
Input Voltage	200-240VAC, 380-480VAC, 500-575VAC, 600VAC, 690VAC
Digital Outputs	2
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Operating Temperature	-10°C to +50°C
Humidity	5% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Braking	Built-in dynamic braking