AC10 Inverter
Safety
Safety Information
Requirements
IMPORTANT: Please read this information BEFORE installing the equipment.
Intended Users
This manual is to be made available to all persons who are required to install, configure or
service equipment described herein, or any other associated operation.
The information given is intended to highlight safety issues, EMC considerations, and to enable
the user to obtain maximum benefit from the equipment.
Complete the following table for future reference detailing how the unit is to be installed and
used.
The information given is intended to highlight safety issues, and to enable the user to obtain
maximum benefit from the equipment.
INSTALLATION DETAILS
Model Number
(see product label)
Unit used as a:
(refer to Certification
for the Inverter)
Component Relevant Apparatus
Unit fitted:
Wall-mounted Enclosure
Application Area
The equipment described is intended for industrial motor speed control utilising AC induction
motors.
Personnel
Installation, operation and maintenance of the equipment should be carried out by competent
personnel. A competent person is someone who is technically qualified and familiar with all
safety information and established safety practices; with the installation process, operation and
maintenance of this equipment; and with all the hazards involved.
Product Warnings
To Next Page
Loading...
Need help?
General
