Parker AC10 series User Manual

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF
THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS
CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY
DAMAGE.
This document and other information from Parker-Hannifin
Corporation, its subsidiaries and authorized distributors provide
product or system options for further investigation by users having
technical expertise.
The user, through its own analysis and testing, is solely responsible
for making the final selection of the system and components and
assuring that all performance, endurance, maintenance, safety and
warning requirements of the application are met. The user must
analyze all aspects of the application, follow applicable industry
standards, and follow the information concerning the product in the
current product catalog and in any other materials provided from
Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors
provide component or system options based upon data or
specifications provided by the user, the user is responsible for
determining that such data and specifications are suitable and
sufficient for all applications and reasonably foreseeable uses of the
components or systems.
TC-Hydraulik - Rsdorfer Str. 8 - 25746 Heide - Lars Lornsen - T: +49 481 909 - 34 - l.lornsen@tc-hydraulik.de - www.tc-hydraulik.de

Parker AC10 series Specifications

General

Overload Capacity	150% for 60 seconds
Analog Inputs	2
Analog Outputs	1
Communication Options	Modbus RTU
Protection Rating	IP20
Input Voltage	200-240VAC, 380-480VAC, 500-575VAC, 600VAC, 690VAC
Digital Outputs	2
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Operating Temperature	-10°C to +50°C
Humidity	5% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Braking	Built-in dynamic braking