Parker AC10 series User Manual

Function Parameters 9-39
AC10 Inverter
F710 Record of Malfunction Type for
Last but Two
5: inverter overload (OL1)
6: under voltage (LU)
7: overheat (OH)
8: motor overload (OL2)
11: external malfunction (ESP)
13. studying parameters without
motor (Err2)
16: over current 1 (OC1)
17: output phase loss (PF0)
18: aerr analog disconnected
20: EP/EP2/EP3 under-load
22: nP pressure control
23: PID parameters are set wrong
(Err5)
32: PMSM distuning fault (PCE)
45: communication timeout (CE)
46: Flycatching fault (FL)
49: Watchdog fault (Err6)
50: STO fault
F711 Fault Frequency of The Latest
Malfunction
F712 Fault Current of The Latest
Malfunction
F713 Fault PN Voltage of The Latest
Malfunction
F714 Fault Frequency of Last
Malfunction but One
F715 Fault Current of Last Malfunction
but One
F716 Fault PN Voltage of Last
Malfunction but One
F717 Fault Frequency of Last
Malfunction but Two
F718 Fault Current of Last Malfunction
but Two
F719 Fault PN Voltage of Last
Malfunction but Two
F720 Record of overcurrent protection
fault times
F721 Record of overvoltage protection
fault times
F722 Record of overheat protection fault
times
F723 Record of overload protection fault
times
TC-Hydraulik - Rsdorfer Str. 8 - 25746 Heide - Lars Lornsen - T: +49 481 909 - 34 - l.lornsen@tc-hydraulik.de - www.tc-hydraulik.de

Parker AC10 series Specifications

General

Overload Capacity	150% for 60 seconds
Analog Inputs	2
Analog Outputs	1
Communication Options	Modbus RTU
Protection Rating	IP20
Input Voltage	200-240VAC, 380-480VAC, 500-575VAC, 600VAC, 690VAC
Digital Outputs	2
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Operating Temperature	-10°C to +50°C
Humidity	5% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Braking	Built-in dynamic braking