Parker EX Series User Manual

121 – Pvd3665_Gb_Ex_August 2022
4. COMMISSIONING, USE AND MAINTENANCE
4.1. Instructions for commissioning, use and maintenance
4.1.1. Equipment delivery
All servomotors are strictly controlled during manufacturing, before shipping.
While receiving it, it is necessary to verify motor condition and if it has not been damaged in
transit. Remove it carefully from its packaging. Verify that the data written on the label are
the same as the ones on the acknowledgement of order, and that all documents or needed
accessories for user are present in the packaging.
Warning: In case of damaged material during the transport, the recipient
must immediately make reservations to the carrier through a registered
mail within 24 h..
4.1.2. Handling
The servomotors EX8 are equipped with two lifting rings intended for handling.
Caution: Use only servomotors lifting rings, if present, or slings to handle
the motor. Do not handle the motor with the help of electrical cables,
connectors and water inputs/outputs, or use any other inappropriate
method.
The drawings below show the correct handling procedure.
DANGER: Choose the correct slings for the motor weight. The two slings
must the same length and a minimum angle of 50° has to be respected
between the motor axis and the slings.
50°mini

Parker EX Series Specifications

General

Fuel Type	Gasoline
Control Type	Electronic
Valves per Cylinder	4
Fuel System	Fuel Injected
Bore x Stroke	86 mm x 86 mm