24 – Pvd3665_Gb_Ex_August 2022
1. INTRODUCTION
1.1. Purpose and intended audience
This manual contains information that must be observed to select, install, operate and
maintain PARKER EX servomotors.
Installation, operation and maintenance of the equipment should be carried out by qualified
personnel. A qualified person is someone who is technically competent and familiar with all
safety information and established safety practices; with the installation process, operation
and maintenance of this equipment; and with all the hazards involved.
Reading and understanding the information described in this document is mandatory before
carrying out any operation on the motors. If any malfunction or technical problem occurs,
that has not been dealt with in this manual, please contact PARKER for technical assistance.
In case of missing information or doubts regarding the installation procedures, safety
instructions or any other issue tackled in this manual, please contact PARKER as well.
PARKER’s responsibility is limited to its servomotors and does not encompass the whole
user’s system. Data provided in this manual are for product description only and may not be
guaranteed, unless expressly mentioned in a contract.
DANGER: PARKER declines responsibility for any accident or material
damage that may arise, if the procedures and safety instructions
described in this manual are not scrupulously followed.
Motors for hazardous classified locations : EX servomotors
manufactured for the North American market are designed to operate
in harzardous classified areas.
To Next Page
Loading...
