Parker EX Series User Manual

40 – Pvd3665_Gb_Ex_August 2022
2.6. Product Code
The EX servomotors are defined by its electrical and mechanical characteristics, by its
accompanying accessories and by any customer specificity. This information is coded and
entered in the “Type” column on the manufacturer’s plate for the basic codification; the
specificities are entered in a separate column (Check option available for each certification).
Code
E
X
3
1
0
E
A
K
R
1
2
0
0
Product Series
Motor size
1, 2, 3, 4, 6 or 8 in relation with the
motor diameter
Motor length
up to 60 depend on size
Motor version
E: ATEX/IECEx motor
U: UL motor
Feedback Sensor
A: resolver 2 poles transformation ratio = 0.5
P: DSL encoder singleturn EKS36 – SIL2 (Not for UL)
Q: DSL encoder multiturn EKM36 – SIL2 (Not for UL)
R: Hiperface singleturn SKS36 – SIL2 (128pulses)
S: Hiperface mutiturn SKM36 – SIL2 (128pulses)
request
Y: sensorless
Z : Special encoder
Torque / Speed Characteristics
See motor data
Painting
R: no painting
B: Black painting
Electric connection
1: Cable gland or threaded holes (UL)
Break and thermal sensor option
2: Without brake
5: With brake
Mechanical Interface
00: IP64 plain shaft on
request
01: IP64 key on shaft on
request
10: IP65 with plain shaft
11: IP65 with key on shaft
Other: custom code
Name Plate
Blank : ATEX/IECEx/UL
C: CCC name plate

Parker EX Series Specifications

General

Fuel Type	Gasoline
Control Type	Electronic
Valves per Cylinder	4
Fuel System	Fuel Injected
Bore x Stroke	86 mm x 86 mm