ANAFI
User Guide v2.6 – published on August 30, 2019
69
Activate and monitor the Follow Me mode and each Dronie with care: always check
your flight plan is clear from obstacles and safe, always retain visual contact with
ANAFI, and always be ready to stop the following (tap the “STOP” box of your HUD)
in case a danger or any sort of unexpected obstacle arises.
To optimize the drone’s tracking, always make sure you remain visible by ANAFI: do
not let an obstacle obstruct the camera’s view and do not hide in the shadows, or
ANAFI could lose track of you.
Smartdronies
ANAFI features four Smartdronies:
- the Orbit, Parabola and Boomerang Dronie can be accessed through this menu –
refer to the above section for details about the Boomerang Dronie;
- however, the smartest of ANAFI’s dronies is the Dolly Zoom.
We will not spoil it for you: just make sure you have a memorable scenery behind
you. Frame yourself (or better yet, your group of friends!) with ANAFI: keep the
drone at least 5 meters away, at man level, between 1 and 2 meters above the
ground.
Check that the flight path of your drone is perfectly clear: at least 30 meters behind
it, flat and without obstacles.
Tap “Smartrdronies” from the “PILOTING MODE” box menu.
As for the Follow Me mode, both a drone GPS synchronization and a device GPS
synchronization are imperative to activate this mode: upon first activation, the same
warning page appears as for the Follow Me mode. Tick the box on the bottom left on
the page if you do not want this warning to appear again when no prerequisite is
missing. Tap “FLY” to access the Smartdronies mode.
Tap the Dolly Zoom Dronie to open its three options: try them all and enjoy the
magic!
FPV
Prerequisites for accessing FPV Mode: use with Parrot Cockpitglasses 3 and it is
essential to be connected to the Parrot Skycontroller 3 via a USB cable.
Touch the FPV tile from the home page or touch the FPV tile accessible via the
"FLYING MODE" menu.
Refer to the "HUD FPV Description - Settings" section for a detailed description of
FPV mode.
Refer to the "HUD FPV Description - SeeThrough Mode" section for a detailed
description of Seethrough mode.
To Next Page
Loading...
Need help?
General
