ANAFI
4
PREREQUISITES
You want ANAFI up in the air as soon as possible, so do we. Refer to the enclosed Super
Quick Start Guide (SQSG) if you need illustrated guidance to get these quick prerequisites
out of the way.
1. Wake your ANAFI’s smart battery up. Charge the battery using the enclosed USB-A
to USB-C cable and a USB-A power adapter (not included in the box, except for
ANAFI Work). The battery’s LEDs start flashing: it is awake. Let it charge while you
read. Parrot recommends you always run a full charge of your smart battery before
flying ANAFI.
2. Download FreeFlight 6 on your iOS or Android smartphone: ANAFI requires
FreeFlight 6 to fly. The app will enable you to update your Parrot Skycontroller 3 and
ANAFI when you power them on for the first time.
Android FreeFlight 6 QR code iOS FreeFlight 6 QR code
When you have downloaded and installed FreeFlight 6, unfold the central arm of
Parrot Skycontroller 3 to power it on.
Use your device’s USB cable to connect it to Parrot Skycontroller 3 USB-A port, and
install it on the device holder, as shown in the enclosed SQSG.
A prompt appears on your screen, which invites you to allow the communication
between your device and the controller.
Tap “Allow” (iOS) or “OK” (Android): FreeFlight 6 runs. After your device displays the
app’s splash screen, you get to FreeFlight 6 homepage.
To Next Page
Loading...
Need help?
General
