ANAFI
54
Android 1080p x3 zoom
Note that in the video mode, when you leave the lossless envelope of the zoom, the zoom
indicator, on the middle left of the HUD, turns orange instead of white.
Camera Calibration: Correct horizon (exceptional procedure)
Your ANAFI’s camera has been factory-calibrated with unparalleled precision.
Unlike the calibration of ANAFI or that of the Parrot Skycontroller 3, which must be
carried out periodically, the camera calibration must not be carried out unless it
appears necessary – typically, after a crash.
If you notice a tilted horizon on all your videos and photos, and if this tilt is always
on the same side, access camera calibration to make your horizon perfectly straight
again.
This feature is accessible from the ANAFI box on the FreeFlight 6 homepage (or from the
ANAFI box of the HUD) and from the “PREFERENCE – Camera” menu.
Before starting this procedure, you need to position ANAFI on a flat and perfectly level
surface, exactly perpendicular to any pattern containing straight lines you can use as horizon
references. A set square can help you check that a line on your floor is perpendicular to your
wall, as on the following pictures.
Finding a line perpendicular to the wall
To Next Page
Loading...
Need help?
General
