ANAFI
40
SeeThrough Mode
The user has direct access to SeeThrough mode via the bottom button of the Parrot
Cockpitglasses 3.
SeeThrough mode gives the user a live view of the surroundings via the terminal's camera.
Parrot recommends that you use the SeeThrough mode when your drone is taking off, in
order to have a better display of the scene.
When your drone is flying and the GPS of your drone is recognised and is located more
than 10 m from the user, a brightly-coloured widget icon marks its location and direction
in augmented reality.
PREFERENCES
Access FreeFlight 6 preferences through the icon on the extreme right of the top bar of the
homepage, or that of the HUD. Preferences enable you to fine-tune ANAFI to your hand – to
customize it, to fit your piloting and filming styles.
Access Preferences submenus from the boxes on the left of the screen. Tap a box to select it
and access its items.
For all items, default values (DV) are marked in bold characters.
Interface
The Interface preferences set the way your controller behaves and the amount of
information you want on your FreeFlight 6 HUD. It also enables you to activate the “Hand-
launch” option.
The interface preferences allow you to adjust the behaviour of the controller. They also allow you to
activate the "launched take-off" function.
Tap an item option to select it.
- Control mode: DEFAULT / SPECIAL (refer to diagrams for control details)
- Inverse joys OFF (white) / ON (green)
- Show minimap NEVER / WITH CONTROLLER / ALWAYS
- Map type ROADMAD / SATELLITE / HYBRID
- Hand-launch NO / YES
- Show framing grid NO / 3x3 / 6x6
- Measurement system AUTO / IMPERIAL / METRIC
The EV Trigger, if selected, allows the user to control the EV directly from the Parrot
Skycontroller 3. The zoom trigger (see the "PARROT SKYCONTROLLER 3 PRESENTATION -
Camera and Platform Control" paragraph) then becomes the EV trigger. The user can
manually modify the EV (between the values of -3.0 and +3.0, in increments of 0.3), which
will automatically change the shutter speed(s) between 1/100 and 1/25.Touch "Reset
Interface Settings" to restore the default values for this menu.
To Next Page
Loading...
Need help?
General
